Hanging Front Door Banner

12 Comments

Silhouette sent me some flocked heat transfer a while back & I’ve made a couple of fun projects with it. It’s great stuff & oh so fun to be able to have texturized iron ons! I made Penelope’s dino napkins & birthday shirt using the flocked material. She loves rubbing her hands along the soft dino decal.

undefined

Just today I finished a project I’ve been meaning to do for ages. I found this sweet banner via AnnilyGreen & before I even knew that these were being sold (I really hate to be a copy-cat, but let’s be honest I totally am) I knew I had to make one for our front door. I thought instead of a wreath, this banner idea would be the perfect way to welcome friends & family to our home.

undefined

I used teal fabric from Hobby Lobby, a dowel that I had lying around, velvet & satin ribbon I scored on the cheap (less than $1) and flocked heat transfer courtesy of Silhouette. When I sewed the banner together, I stuck a neodymium magnet inside at the bottom so that it would 1) weigh down the banner so it didn’t fly off & 2) stick to the metal door, keeping the banner from flying around when it gets windy. It sure has been windy around our house the last few days. I heard there were 60 mph cross winds on the freeway yesterday. NUTS, hu?

undefined

I digitally calligraphed the phrase & if you’d like to use the artwork, feel free to download it by clicking one of the buttons below. The top button is to download the PDF, the bottom is to download the Silhouette Studio file. I’d love to see what you make out of the download so please send me pics! As Usual, artwork is free for personal use only and should not be distributed or altered without my consent. If you would like to use this for commercial purposes, please email me. Thanks!

Speaking of Illustrator, when I first got the Silhouette I had Illustrator CS3. I’ve now since upgraded to CS5 & have been designing cutter graphics in CS5 then cutting them in CS3, as the CS3 plugin doesn’t work with CS5. It’s been really annoying to have to save a file, then open up illustrator again in order to cut the stuff out. I’ve been fussing around the last few days trying to figure out how to get the plugin to work & frustratingly enough, it stopped working in CS3! Long story longer, I figured out how to get the plug-in installed in CS5!! First you need to uninstall the old driver (if applicable) then install the correct driver: C-Master2forCraftROBO(M)ver180. I didn’t have the correct software, so that’s why it wasn’t working. I somehow had the C-Master2(M)ver180. It’s VERY different, because it doesn’t include support for the CC3300L models. As soon as I followed the instructions on the correct software, it worked like a charm. You also want to make sure that Illustrator is closed before installing.

On another note, it took 3 attempts to get this to look right. The first attempt, I had some crap on my desk & the cutter got bumped & ruined the piece of flocking. Clear off the area around your cutter before cutting! The second attempt was ruined because the iron was too hot & I didn’t put down a sheet of cloth covering the wax paper, so it just crumpled up. I ended up having to turn the banner around & use the back side, because that completely ruined the front. All worked out okay though. Despite my swearing. If everything had worked according to plan, this project would’ve taken less than an hour.

If you’re interested in buying a Silhouette, use the above code at check out for:

  • 1 Silhouette SD
  • 1 package white flocked heat transfer material
  • 1 package teal smooth heat transfer material
  • 1 package dark pink smooth heat transfer

for $219 ($125 savings) Valid May 17th – 25th

Or, if you already have a Silhouette (or any other cutting machine for that matter) save 25% using the above code on heat transfer materials.

view or add a comment
  1. Connie says:

    Love this! I need to make one pronto! Thanks for sharing your lovely calligraphy.

  2. Leanne says:

    I love your door hanging. I got the invitation in the mail. Thank you so much! I’m so excited to meet you!

  3. Emily says:

    Oh my! This is adorable! One day, I will own a Silhouette machine. Also, I think this would be a really cute way to to welcome home a new baby…I can totally envision a custom banner that says “Weclome Home Baby (fill-in-the-blank).” Hmmm…….

  4. Shaela says:

    SUPER cute banner! I always hang a wreath and place a vinyl-cut “Welcome” on our front door. I think I finally found my favorite font for the welcome – it’s on our door now.

  5. Diana Smith says:

    THis is really cute Melissa! I love the color and it just reminds me of like a baby or wedding shower!!

  6. The Silhouette? What is this amazing contraption and how have I never heard of it?! And where can I find $219 before May 25th???

    Thanks for sharing :) and I love that cheery banner! I’m a new reader to your blog and so far I love it all!

  7. Laurel G says:

    love this! look so cute! And thanks for the illustrator plug in info, I’ll have to get that installed and try it out!

  8. Nicole says:

    this is a beautiful banner. i love all of the swirls!

  9. […] – Book strap from  Lorraine via How About Orange 2 – Hanging  front door banner from ISLY 3 – Braided doormat from Martha Stuart 4 – Catch and release scarf from […]

  10. This is fabulous and the colors are perfect. Thanks for sharing.

  11. […] think I’ll hang this banner somewhere, but for now, it just rests on the door nob. I made this last year, two houses […]

mobile site